Skip to content
IRIS NEURALContact

Banking

CAM-510

The line tells you how many desks you need at that hour

Friday lunchtime in a neighborhood branch. Behind the cord, six people stand waiting their turn, the seated area is full and three people are serving at the counter: two positions are still closed. IRIS counts how many are waiting, how long the last one in line takes, how many positions are in use and how many leave without being served. The figure doesn’t come from any screen on the wall: it comes from a line and two areas drawn onto the image.

Friday lunchtime in a neighborhood branch. Behind the cord, six people stand waiting their turn, the seated area is full and three people are serving at the counter: two positions are still closed. IRIS counts how many are waiting, how long the last one in line takes, how many positions are in use and how many leave without being served. The figure doesn’t come from any screen on the wall: it comes from a line and two areas drawn onto the image.
CAM-510IRIS VisionLive

Turn on IRIS Vision

AI-generated image

CAM-510 · 2 LINES · 2 ZONES · 24 h

What IRIS understands

What it recognizes in this scene

  • queue waiting behind the cord
  • last person in line
  • cord and posts marking the line
  • counter with three positions serving
  • seated waiting area, full
  • self-service machine, free
  • customer being served
  • queue screen on the wall

What this camera gives back

Nobody gets an alert here. Here you get numbers.

  • 17+6People waiting right now
  • 11 min+4 minWait for the last person in line
  • 3 / 5Positions serving, of those there are
  • 46 / hPeople served per hour
  • 5Left without being served
  • 12:00 – 13:00Busiest time slot of the day

The figures on this screen are an example from the illustration, not any client’s measurement.

IRIS incorporates NeuralPax, a separate license approved by the Centro Español de Metrología — Spain’s national metrology institute — for people counting, occupancy and crowd-flow control. That the figure is right is guaranteed by a third party, not by us: the occupancy figure you show is measured and approved, not estimated. The approval covers that measurement — counting people — not the whole product. That approval is Spanish and it isn’t equivalent to any U.S. certification: we say so up front and not at the end.

How the counting works

Counting isn’t something you ask for. You draw a line.

A line runs along the edge of the counter: whoever crosses it’s been served. Another sits at the mouth of the queue and says how many people join and at what time. And two areas are painted on the floor, one over the waiting lane and one over the sofas, saying how many people are inside and how long they have been there. Anyone who enters the area and leaves without crossing the counter line has left without being served. Neither the line nor the area can be asked for in words: they’re drawn once onto the image and stay there, so a Tuesday figure and a Friday figure are measured the same way. Counting people is the only measurement we hold approval for from the Centro Español de Metrología, Spain’s national metrology institute, and it’s NeuralPax that does it, a separate license built into IRIS. We don’t claim accuracy. We certify it. It’s a Spanish approval. What crosses over isn’t the seal, it’s the method: the same line, in the same place, every day.

  • line along the edge of the counter · Counting line
  • line at the mouth of the queue · Counting line
  • waiting lane between the posts · Dwell zone
  • seated waiting area · Dwell zone

And also, one rule

You decide once. IRIS applies it always.

If

the wait for the last person in line goes over ten minutes and a counter position is still closed

Then

  1. alert the branch manager with how many people are waiting and how many positions are in use
  2. save the video of the minute the line stopped going down
  3. leave the count for that time slot in the daily log
The instruction that set it up«Tell me when the wait goes over ten minutes and there is still a counter position closed.»

What changes

What changes for whoever answers for the branch network

With that figure the branch manager stops assigning staff by eye. He knows what time of day it really fills up, how many positions that slot needs and how many people walk out without waiting, which is business going out of the door and shows up nowhere today. And when the whole network measures the same way, one branch can be compared with another without arguing about where the number came from. Nobody stops coming because they waited five minutes; they stop coming after waiting twenty, three times in a row.

What people usually ask

Can IRIS’s people counting be used to size a branch?

Yes. Counting people is the only measurement we hold approval for from the Centro Español de Metrología, Spain’s national metrology institute, and it’s NeuralPax that does it, a separate license built into IRIS. That’s why the figure stands up in front of whoever has to check it when it is used to set opening hours, positions and extra cover, and to compare one branch with another. We don’t claim accuracy: we certify it. Everything else IRIS does isn’t covered by that approval, and we don’t present it as if it were. That approval is Spanish and it isn’t equivalent to any U.S. certification: we say so up front and not at the end.

Does IRIS know who is standing in line?

No. In a bank branch IRIS does not recognize faces, does not compare them against any database, does not read license plates and does not identify any customer. It counts bodies crossing a line and bodies inside a drawn area. It knows there are seventeen people waiting and that the last one has been there eleven minutes; it does not know who any of them are, and it does not need to in order to give the figure.

Does the figure come from the queue screen?

No. IRIS doesn’t read screens or signs. The queue screen counts whoever took a ticket; the line counts whoever actually reached the counter, and the area counts whoever is waiting even if they took no ticket, sat down or left first. That’s why the two figures doesn’t need to match, and why the camera’s figure is measured the same way every day.

Demo · IRIS at work

A camera looks. IRIS understands what it sees.

An extract of the real screen, no voice-over and hands-free. Each round poses another situation. What sits behind it is a good deal bigger than what you see.

  1. The hour, as a grid
  2. You look where it’s dark
  3. You jump to that minute
IRIS NEURAL
30ES
IRISDirectoGrabacionesGISIncidencias3996SituaciónCasosLPRAutomatizacionesIRIS DATA
Ask a question or make a request…Send
IRIS · Infinity Neural

And the best part

No building work, no trenches, no new cabling:the cameras are already up and already looking.

What changes is what happens to the picture. It used to be stored and never seen; now it’s understood while it happens, on the same equipment you bought years ago.

Tell us your problem and we’ll say whether IRIS understands it, or not yet.

A person answers, the same working day.