CAM-293
A dark speck floating inside a filled vial
Visual inspection station at the end of the filling line. Vials pass one by one in front of a lit white screen inside the cabinet. In one of them a dark speck can be seen inside the liquid, halfway up. On the left, an operator in gown, hairnet, mask and gloves has picked another vial off the belt and is holding it against the light. Behind, the line keeps carrying vials towards the outfeed curve.
Turn on IRIS Vision
AI-generated image
What IRIS understands
What it recognises in this scene
- vial with a visible particle
- visual inspection cabinet
- vial checked against the light
- inspection operator
- outfeed tray of vials
What this camera measures
An alert says something is happening. The reading says how much.
- 1vials flagged on this pass
- 318vials inspected in the hour
- 15 stime since the alert
- 1people at the station
- 09:34time of the alert
The figures on this screen are an example from the illustration, not any client's measurement.
The rule
You decide once. IRIS applies it always.
If
a vial goes through the inspection station with a visible particle inside the liquid
Then
- alerts the inspector at the station and quality
- saves the picture of the vial and the video of its pass
- logs the time and the position of the vial in the sequence
The instruction that set it up«Alert me if a vial goes through the inspection with something dark floating inside.»
What changes
What changes for whoever answers for the plant
A particle inside an injectable vial is grounds for rejection, and finding it depends on somebody looking at exactly the right second. Visual inspection is tiring and the shift is long. IRIS looks at every vial with the same attention and alerts while the vial is going past, with its image and its time. That way the unit is pulled and its neighbours checked, instead of finding out once the batch is palletised.
What people usually ask
Does IRIS detect microbiological contamination?
No. A camera sees what is visible: a fibre, a flake, a dark fragment inside the liquid. Contamination by microorganisms cannot be seen, it is grown in the laboratory. IRIS alerts on the visible particle, leaves the image and the time, and the rest of the way is covered by analysis. They are different things and it pays not to mix them up.
Does IRIS see any particle, however small?
No. It sees the one that stands out in the backlit image, and that depends on size, colour, container and lighting. Smaller particles need dedicated inspection equipment. That is why IRIS is installed alongside the inspection and not in its place: it adds a constant eye on what is genuinely visible.
Does the alert help pull the affected vial?
Yes. IRIS marks the exact time and the position of the vial in the sequence, and keeps its picture. With that, the team locates the unit and decides what to do with the ones next to it, working from evidence that can be replayed and shown days later, not from what someone thinks they remember.
Other cameras
- CAM-280 · Through the gowning room with no mask and street shoes on
- CAM-281 · Both airlock doors open at the same time
- CAM-282 · Eight people in the room and the routes crossing
- CAM-283 · The previous batch is still on the table
- CAM-284 · A green-lidded drum where it does not belong
- CAM-285 · A pink carton moving among identical blue ones
Simulation · how IRIS works
This isn’t a video. It’s a slice of the real screen.
A summary of the real interface, played hands-free. You see one case from start to finish; what you do not see are the other screens, and there are many.
- The hour, as a grid
- You look where it's dark
- You jump to that minute
Next step
What does an airport see before the queue forms?
14 cases: 7 raise an alert when something happens and 7 only measure. You see each image as it is, and then with what IRIS understands on top.
What can a camera see without pointing at anyone?
13 cases: 9 raise an alert when something happens and 4 only measure. You see each image as it is, and then with what IRIS understands on top.
And the best part
You decide the rule onceand it is applied the same way every time.
At three in the morning it means what it means at noon, on camera one and on camera four thousand. It does not depend on who is on shift, or how tired they are.
Tell us your problem and we will say whether IRIS understands it, or not yet.
We reply the same working day.