Skip to content
IRIS NEURALContact
Back to industry

CAM-409

An open hatch and everybody walking straight past

Early afternoon at a pumping station. In the middle of the yard, the steel lid of an access hatch is tipped up on its hinge and the opening is left uncovered, with the yellow ladder going down inside. There is no barrier, no chain, no cone: only the stripe painted on the ground. A worker in a helmet and hi-vis vest walks two metres past without stopping. Behind him, the pump room door is standing wide open too.

Early afternoon at a pumping station. In the middle of the yard, the steel lid of an access hatch is tipped up on its hinge and the opening is left uncovered, with the yellow ladder going down inside. There is no barrier, no chain, no cone: only the stripe painted on the ground. A worker in a helmet and hi-vis vest walks two metres past without stopping. Behind him, the pump room door is standing wide open too.
CAM-409IRIS VisionLive

Turn on IRIS Vision

AI-generated image

CAM-409 · PUMP STATION YARD · HATCH OPEN

What IRIS understands

What it recognises in this scene

  • access opening left uncovered, with the ladder
  • lid tipped up on its hinge
  • pump room door, standing open
  • worker walking straight past
  • uncovered water channels

What this camera measures

An alert says something is happening. The reading says how much.

  • 35 minOpen for
  • 2Openings standing open in frame
  • 1People who have walked past it
  • 2People in frame
  • 13:15Time of the alert

The figures on this screen are an example from the illustration, not any client's measurement.

The rule

You decide once. IRIS applies it always.

If

a hatch or an access door has been open for longer than the agreed time and there is nobody next to it

Then

  1. alert the supervisor with the camera, the time and the video of the moment it was opened
  2. keep the sequence from the moment the lid was lifted
  3. log the alert in the daily report with the opening and how long it has been open
The instruction that set it up«Tell me if a hatch or a door is left open for more than twenty minutes with nobody beside it.»

What changes

What changes for whoever answers for the plant

An open hatch makes no noise and sends no signal: there is nothing in the control room that says this hole has been waiting for half an hour. Somebody opens it to go down, comes back up, goes for lunch and leaves it like that. This camera puts a clock on every opening and raises the alert when it passes the agreed time with nobody beside it. The site manager decides whether to have it shut or whether there is work going on below.

What people usually ask

What if somebody is working down there?

Then it should not raise anything for being open, and it does not: the rule measures how long the opening stays uncovered with nobody beside it. While there is a person next to the access, the clock does not run. When the hatch is left alone, it starts counting, and after the number of minutes the site has agreed, the alert goes out. Going down into a confined space is a different rule, with its own attendant.

Can it tell an open hatch from a closed one?

Yes, and it is among the easiest things a camera does. A closed hatch is a continuous surface; an open one leaves a dark rectangle, the leaf tipped up and, here, a ladder in plain sight. That reads from a distance and in poor light. What the camera does not know is whether that hatch was meant to be open: the work permit says that, which is why the alert carries the video.

Can the same rule be applied to doors?

Yes. It is the same idea: an access left open for longer than agreed with nobody nearby. It works for the hatch over the wet well, for the pump room door and for the compound gate. Each access gets its own time, because a door people go through all day is not the same as a lid over a shaft. Those times are set by the site.

Simulation · how IRIS works

Everything comes in. Only what matters gets through.

This sums up what IRIS does with one alert, from the moment it appears until it is closed. The real screen holds far more; this is the main thread.

  1. Cameras on the map
  2. You draw an area
  3. What passed shows up
IRIS NEURAL
30ES
IRISDirectoGrabacionesGISIncidencias3996SituaciónCasosLPRAutomatizacionesIRIS DATA
Ask a question or make a request…Send
IRIS · Infinity Neural

And the best part

You decide the rule onceand it is applied the same way every time.

At three in the morning it means what it means at noon, on camera one and on camera four thousand. It does not depend on who is on shift, or how tired they are.

Tell us your problem and we will say whether IRIS understands it, or not yet.

We reply the same working day.