CAM-412

Someone has climbed down into the chamber and nobody is left up top

Mid-morning at the plant. The chamber cover is lying to one side, the ladder pokes out of the opening and an operator in helmet and hi-vis is already climbing down: all you can see is his head, his shoulders and his gloves gripping the rung. Around the chamber the paving is empty. There is nobody outside, no tripod, no lifeline in sight. IRIS sees two things and puts them together: someone has entered the chamber and there is no person left in the attendant zone.

CAM-412 · CHAMBER ACCESS · NO ATTENDANT

What IRIS understands

What it recognises in this scene

operator climbing down into the chamber
chamber opening uncovered
ladder poking out of the opening
cover moved aside on the ground
area around the chamber, with nobody in it
life ring, far from the chamber

What this camera measures

An alert says something is happening. The reading says how much.

1People in shot
0People outside the chamber
2 minTime since he started climbing down
1Open accesses in shot
10:12Time of the alert

The figures on this screen are an example from the illustration, not any client's measurement.

The rule

You decide once. IRIS applies it always.

a person enters the chamber and nobody is left in the attendant zone around it

Then

alert the maintenance manager and the control room with the camera and the time
save the video from the moment the cover was moved aside
keep the alert open until a person closes it

The instruction that set it up«Tell me if anyone climbs down into a chamber and there is nobody keeping watch outside.»

What changes

What changes for whoever answers for the plant

The attendant outside is not paperwork: they are the one who shouts and the one who pulls on the line. The maintenance manager gets the alert while the operator still has half his body above ground, which is when it can still be stopped. And there is the video of the entry with the time on it, which is what any investigation asks for afterwards and what nobody manages to reconstruct from memory and a signature on a permit.

What people usually ask

Does IRIS measure the gas inside the chamber?

No. A camera does not measure atmospheres. Oxygen and gases are measured by the personal detector carried by whoever goes down, and no image replaces that. What IRIS sees is the part that can be seen: the cover moved aside, the person going in and whether anyone is keeping watch outside. Both things are needed and neither stands in for the other.

How does it know the person outside is the attendant?

It does not know, and it does not need to. IRIS identifies nobody and checks no names. It counts how many people are inside the marked zone around the access while someone is down there. If the number is zero, it raises an alert. Whether the person outside is the right one and properly trained is a matter for the work permit, not for the camera.

And if the attendant steps away for a moment?

That depends on what the plant decides. The rule carries a tolerance set by whoever runs the site: a few seconds to walk round a piece of equipment, or zero tolerance while anyone is down there. IRIS applies the number it is given and saves the video of the interval in which the zone was empty, so it can be looked at calmly afterwards.

Other cameras