CAM-215
A pool of foam right across the walkway
Process hall, mid-morning. A jet is coming out of a pipe on the stainless steel skid and hitting the floor, and white foam already covers half the hall: it runs from the machine on the left as far as the yellow walkway line. One operator is bent over the pipe trying to close it, another watches from the edge of the pool and a third is calling it in on the radio from the aisle. At the back the bottling line keeps running.
Turn on IRIS Vision
AI-generated image
What IRIS understands
What it recognises in this scene
- foam on the floor
- jet from the pipe
- process skid
- operator at the pipe
- operator calling on the radio
- walkway line
What this camera measures
An alert says something is happening. The reading says how much.
- 3 minSpill visible for
- 5People in the hall
- 1Visible leak points
- 1Walkway lines reached
- 10:26Time of the alert
The figures on this screen are an example from the illustration, not any client's measurement.
The rule
You decide once. IRIS applies it always.
If
liquid or foam appears on the floor of the process area and the pool is still growing seconds later
Then
- alert the shift manager and maintenance with the camera and the spot of the spill
- keep the video from the seconds before, to see where it started coming out
- log the time and whether the pool has reached the walkway line
The instruction that set it up«Tell me if liquid or foam builds up on the process floor, even at night with nobody around.»
What changes
What changes for whoever answers for the plant
A spill in a beverage plant is two problems in one: product going down the drain and a floor where somebody falls. Today it is found when somebody walks past and sees it. IRIS watches that floor all the time and alerts the shift manager with the camera, the minute and the video while the pool is still small. It closes no valve and mops up nothing: a person does that. What it brings is finding out sooner.
What people usually ask
Does IRIS know which liquid has spilled?
No. IRIS sees that there is liquid or foam on the floor, how far it spreads and whether it is still growing. What that liquid is, whether product, cleaning water or a chemical, is not something a camera can say, and it should not be sold that way. What it does do is raise the alert with the camera and the exact minute so that somebody who knows the plant can look and decide. If the composition matters, a laboratory test is needed: the image does not replace it.
Does it trigger on any pool or only on big ones?
The plant decides, not IRIS. The rule sets from what size and in which areas a pool becomes an alert: in a walkway it can trigger on very little, and under a machine that always drips it may never trigger. IRIS applies what has been written for it and does not change the threshold on its own. That is the advantage of letting the rules be written by the people who know the hall.
And if somebody slips and falls?
Yes, IRIS sees that, as long as it happens inside the frame: a person on the floor is a situation it recognises and alerts on just like the spill. What it does not do is predict the fall or say who that person is, because it does not recognise faces. It sees that somebody is lying on the process floor and at what time, sends the video, and whoever gets the alert decides what to do.
Other cameras
- CAM-200 · The line has stopped and nobody knows why
- CAM-201 · Bottles piling up on the accumulation table
- CAM-202 · The line is running and not one bottle goes by
- CAM-203 · A glove on the belt, among the trays
- CAM-204 · A water bottle in the middle of a juice run
- CAM-205 · A label that says the opposite of what is in the bag
Demo · IRIS at work
You set the rule once. IRIS applies it every time.
You will see a summary of the interface, played step by step and hands-free. Each round starts with another case. The complete tool does not fit in a demo.
- Checks the whole system
- Flags what is failing
- Puts it on one screen
Next step
Who sees the child who has fallen at the far end of the playground?
13 cases: 12 raise an alert when something happens and 1 only measure. You see each image as it is, and then with what IRIS understands on top.
Who is watching a site where there is almost never anybody?
44 cases, and in every one of them IRIS raises an alert when something happens. You see each image as it is, and then with what it understands on top.
And the best part
IRIS only sees what the camera shows.Where we do not reach, we say so.
No software fixes a lens pointing the wrong way or covered in dust. Before promising anything, we say which cameras are in a state to see what you are asking of them.
Tell us your problem and we will say whether IRIS understands it, or not yet.
We reply the same working day.