CAM-307
The bund is full to the brim and already spilling over
Midday in the drum yard. The yellow bund is full of dark liquid right up to the rim: the four IBCs and the six blue drums have their bases under water. At the near corner the liquid is falling outside and spreading across the concrete towards the drain grating. An operator in a white helmet watches from the aisle without stepping in. On the ground there is an absorbent sock, still not laid out. IRIS reads the level against the yellow rim and sees where the puddle is heading.
Turn on IRIS Vision
AI-generated image
What IRIS understands
What it recognises in this scene
- bund full to the rim
- liquid falling over the corner
- puddle spreading across the concrete
- drain grating
- absorbent sock not laid out
What this camera measures
An alert says something is happening. The reading says how much.
- 9 minTime since the bund reached the rim
- 4IBCs inside the bund
- 6Drums inside the bund
- 3People in the area
- 12:18Time of the alert
The figures on this screen are an example from the illustration, not any client's measurement.
The rule
You decide once. IRIS applies it always.
If
the liquid in a bund reaches the rim or starts running outside
Then
- alert the environment manager with the camera, the bund and the time
- save the video from the moment the level started rising
- log the incident with the bund, the time and where the puddle was heading
The instruction that set it up«Tell me if the level in a bund reaches the rim, or if liquid starts running outside towards a drain.»
What changes
What changes for whoever answers for the plant
A full bund stops being a barrier: whatever spills after that goes straight onto the concrete, and from the concrete into the network. By the time somebody sees it, the puddle is already outside. With the camera, the environment manager finds out while the level is rising and before it reaches the grating. And there is video with a timestamp, which is exactly what the environmental incident log asks for when it is time to explain what happened and when.
What people usually ask
Does the camera know what liquid is in the bund?
No. IRIS sees that there is liquid, how far up the yellow rim it comes and where it is escaping. What it is — rainwater, spilled product or a mix of the two — comes from whoever samples it. And that difference matters: a bund full of water gets emptied, one with product is handled as waste. The camera adds the minute, the picture and where the puddle was heading, which is what you need in order to act.
Can it measure how many litres are in there?
Not in litres. A camera reads the level against a physical reference it can see: the rim of the bund, a painted mark, the base of a drum. That gives a reliable “it has reached the rim” alert, which is what you need to react in time. An exact volume comes from a level probe or from the bund calculation, not from the picture. IRIS counts what is visible and says it with the time.
Is it any use if the bund has filled up with rainwater?
Yes, and in practice that is the most common case. A bund full of water no longer retains anything, so the alert is just as valid. Plants usually write two rules: one for a high level, dealt with within the shift, and one for liquid running outside, which is urgent. What counts as urgent is decided by the plant, not by the camera: IRIS runs the rule and provides the picture.
Other cameras
- CAM-300 · The drum arriving at the station is not the one on the order
- CAM-301 · Flammables, corrosives and oxidisers in the same bund
- CAM-302 · The tanker hose, coupled to the forbidden manifold
- CAM-303 · The tanker is still connected and nobody is watching it
- CAM-304 · Two drums with the label torn off in the marked bay
- CAM-305 · The IBC has sagged onto a broken pallet and is dripping on the floor
Simulation · how IRIS works
Everything comes in. Only what matters gets through.
This sums up what IRIS does with one alert, from the moment it appears until it is closed. The real screen holds far more; this is the main thread.
- Four cameras at once
- Each understands its own view
- The numbers climb by themselves
Next step
What does a venue with twenty thousand people inside see?
15 cases: 11 raise an alert when something happens and 4 only measure. You see each image as it is, and then with what IRIS understands on top.
When does a bad review get decided?
15 cases: 11 raise an alert when something happens and 4 only measure. You see each image as it is, and then with what IRIS understands on top.
And the best part
You write the rule yourself, in your own words.Nobody has to program it for you.
“Tell me if a fire door is left open.” That is the whole rule. From then on it applies on every camera and at any hour, without ever touching it again.
Tell us your problem and we will say whether IRIS understands it, or not yet.
We reply the same working day.