CAM-332
A man on the ground and an empty plant around him
Early afternoon in a unit with no permanent staff. A worker in blue coveralls and a yellow helmet is lying face up across the drainage channel, arms spread. He is not moving. There is nobody around: the stairs are empty, the walkway is empty, the rest of the plant is empty. The camera does not know what happened to him. It knows there is a person on the ground, in a place where nobody lies down, and that he has not moved for a while.
Turn on IRIS Vision
AI-generated image
What IRIS understands
What it recognises in this scene
- person on the ground, not moving
- drainage channel
- pump skid under the canopy
- process column
- emergency call point
What this camera measures
An alert says something is happening. The reading says how much.
- 4 min 10 sTime without moving
- 1People in the frame
- 0People around
- 13:02Last movement seen
- 13:06Time of the alert
The figures on this screen are an example from the illustration, not any client's measurement.
The rule
You decide once. IRIS applies it always.
If
a person is lying on the ground and is still not moving after the time set
Then
- open the alert with the camera, the spot and the video from before the fall
- call the control room and the plant emergency team
- keep the live camera open until someone arrives
The instruction that set it up«Tell me if anyone stays motionless on the ground for more than a minute anywhere in the unit.»
What changes
What changes for whoever answers for the plant
In an installation with nobody watching, this is the difference between minutes and hours. Without a camera, that man is found by the next person who walks past, and the next person may walk past at the end of the shift. With the rule in place the alert goes out on its own, with the camera, the exact spot and the video, and someone heads there now. IRIS identifies nobody and diagnoses nothing: it sees a person on the ground who is not moving, not who he is or what is wrong. That is for whoever gets there to say.
What people usually ask
Does IRIS know whether the person is unconscious or injured?
No, and it does not claim to. IRIS does not diagnose. What it sees is a person on the ground, in a place where nobody lies down, who has not moved for a while. With that it raises the alert and shows the video. What is wrong and what to do is decided by whoever gets there, because that is the person who can go up to him.
What if someone is working lying on the ground?
The rule gets adjusted. Some jobs are done on the ground, which is why the no-movement time and the area are tuned with the plant. A fitter who moves while working raises nothing; a person who stays still where nobody stays still does. The plant writes the rule, not IRIS.
Is this useful in unmanned installations?
Yes, and that is where it counts most. At a remote valve, a pumping station or an unattended unit there is nobody who could see the person on the ground. The camera is already installed and already looking. What changes is that now, when something like this happens, someone finds out straight away.
Other cameras
- CAM-320 · A jet from the pump and a pool that keeps growing
- CAM-321 · Flame and smoke in the pump row
- CAM-322 · The flare is not burning the way it always does
- CAM-323 · The tank is overflowing from the top
- CAM-324 · The tank hatch is open and nobody is up there
- CAM-325 · The hose is coupled to the wrong header
Every simulation
Something has spilled
Tell me if there is liquid or foam outside its place and it is still there two minutes later.
- The sentence
- Where it applies
- What it finds
- The same rule
Next step
What does a shopping centre see beyond the visitor count?
12 cases: 4 raise an alert when something happens and 8 only measure. You see each image as it is, and then with what IRIS understands on top.
What does an airport see before the queue forms?
14 cases: 7 raise an alert when something happens and 7 only measure. You see each image as it is, and then with what IRIS understands on top.
And the best part
If the camera does not show it,IRIS does not see it. We say so up front, not afterwards.
No camera sees through a wall or in complete darkness. We would rather show you where the limit is, and place what you have well, than promise something that never appears on screen.
Tell us your problem and we will say whether IRIS understands it, or not yet.
We reply the same working day.