IndustryInfrastructure integrity
CAM-331
Bare arms in the pump area
A sunny morning in the pump area. Three workers wear blue flame-resistant coveralls, white helmets and gloves. In the middle of the walkway stands someone with bare arms and legs: they have a helmet, but no flame-resistant clothing. To their left, orange drums are stacked with the flammable-goods diamond on the side, and behind them a green vessel carries the same label. One of the workers is already pointing at them. The camera sees the kit that is missing.
Turn on IRIS Vision
AI-generated image
What IRIS is
IRIS watches the plant for you.
IRIS looks at the cameras you already have on the plant floor and understands what it sees: a stopped line, someone inside a robotic cell, someone without their safety gear on, jammed parts. When something like that happens, it alerts right away; and whatever can be counted, it counts in numbers. All day long, with no one needing to watch the screen.
You tell it what you need to watch, and IRIS does it.
Here, for example, IRIS spots someone missing their flame-resistant clothing right next to the flammable-product drums, and it alerts the shift supervisor with the camera image and the time while that person is still in the walkway. With that alert, you decide whether to get them out of the area right away.
Works with the cameras you already have. Nothing to replace.
A person replies, not a form.
- Your footage never leaves your premises.
- It doesn't identify people.
- Certifications →
What IRIS understands
What it recognises in this scene
- person without flame-resistant clothing
- worker pointing at him
- worker in flame-resistant coveralls
- worker with the shift clipboard
- drums labelled flammable
- vessel labelled flammable
What this camera measures
An alert says something is happening. The reading says how much.
- 1 min 20 sTime in the area
- 4People in the area
- 3Wearing flame-resistant clothing
- 1Without flame-resistant clothing
- 09:47Time of the alert
The figures on this screen are an example from the illustration, not any client's measurement.
The rule
You decide once. IRIS applies it always.
If
a person is in the pump area without the flame-resistant clothing that area requires
Then
- open the alert with the camera, the time and the video of the moment
- notify the area supervisor and the control room
- keep the image for the shift safety report
The instruction that set it up«Tell me if anyone enters the pump area without flame-resistant clothing.»
What changes
What changes for whoever answers for the plant
Nine in the morning, and that person has walked in to hand over a form: two minutes, they reckon. In an area with flammable product, flame-resistant clothing is what separates a scare from a burn. The alert reaches the shift supervisor while they are still in the walkway, with the camera, the time and the video. IRIS sees that the equipment is missing, not who is wearing it: it does not recognise faces or compare them with anything. Which PPE is mandatory in each area is decided by the plant, and taking someone out of there is decided by a person.
What people usually ask
Does IRIS identify the person without flame-resistant clothing?
No. IRIS sees that the kit is missing, not who is wearing it. It does not recognise faces and does not compare them with any database. The alert says one person without flame-resistant clothing in the pump area, and attaches the video. Who it was is checked by a person, if needed, against the plant access log.
Does this work for any item of PPE?
Yes, as long as it can be seen from outside. Helmet, vest, gloves, face protection, flame-resistant clothing: if the camera can tell it apart, IRIS can check it. What cannot be seen is not detected: if a personal gas detector is under a jacket, the camera does not confirm it. And where there is doubt, we say there is doubt.
Does it alert every time somebody walks past?
No, not if the rule is set up properly. The area, the minimum time inside and the hours when it applies are all tuned. Someone crossing the edge for two seconds raises nothing; someone who stays and works there does. What counts as an alert is decided by the plant, not by IRIS.
Other cameras
- CAM-320 · A jet from the pump and a pool that keeps growing
- CAM-321 · Flame and smoke in the pump row
- CAM-322 · The flare is not burning the way it always does
- CAM-323 · The tank is overflowing from the top
- CAM-324 · The tank hatch is open and nobody is up there
- CAM-325 · The hose is coupled to the wrong header
Simulation · how IRIS works
You set the rule once. IRIS applies it every time.
You will see a summary of the interface, played step by step and hands-free. Each round starts with another case. The complete tool does not fit in a demo.
- Cameras on the map
- You draw an area
- What passed shows up
See it somewhere else
How long does it take to find a hand played two hours ago?
12 cases: 9 raise an alert when something happens and 3 only measure. You see each image as it is, and then with what IRIS understands on top.
What does a shopping centre see beyond the visitor count?
12 cases: 4 raise an alert when something happens and 8 only measure. You see each image as it is, and then with what IRIS understands on top.
And the best part
You decide the rule onceand it is applied the same way every time.
At three in the morning it means what it means at noon, on camera one and on camera four thousand. It does not depend on who is on shift, or how tired they are.
Tell us your problem and we will say whether IRIS understands it, or not yet.
We reply the same working day.