CAM-156
Critical room door left open
The plant's switch building, out among the basins. The green door is standing wide open against the wall and through the gap you can see the control panels lit up. Beside the frame there is a wall cabinet with the electrical hazard triangle, and on the other face several outdoor cabinets. An operator in a hi-vis vest is standing next to the door. All around, the aeration channels with the water moving.

Turn on IRIS Vision
AI-generated image
What IRIS understands
What it recognises in this scene
- door standing open
- inside the room
- electrical hazard sign
- operator by the door
- outdoor cabinets
What this camera measures
An alert says something is happening. The reading says how much.
- 12 minOpen for
- 5 minLimit set by the plant
- 16:41Time it was opened
- 1People in the frame
- 2Times today at this door
- 16:53Time of the alert
The figures on this screen are an example from the illustration, not any client's measurement.
The rule
You decide once. IRIS applies it always.
If
a door marked as critical stays open for longer than the plant has set
Then
- alert the operator on duty with the camera and the door
- log what time it was opened and how long it has been open
- close the alert only when the door is back in its frame
The instruction that set it up«Tell me if the switchroom door is left open for more than a few minutes.»
What changes
What changes for whoever answers for the site
It is almost never left open out of pure carelessness: it is left open because somebody went in to do something and came out with both hands full. And from then on dust gets in, rain gets in when it blows sideways, an animal gets in, and anyone gets in. Because the building sits out among the basins, nobody comes past again until the next round, and at night that is hours. IRIS does not close the door and does not send anyone: it flags that the door has been out of its frame for more minutes than the plant said, with the exact time it was opened. Closing it is still a person's job.
What people usually ask
Do you need a contact switch on the door?
No. The camera is already looking at that building. You mark the door on the image and what gets checked is whether it is in its frame or not. And there is something a contact switch cannot give you: the video of the moment it was left open, which is what lets you understand what happened without asking everybody the next morning.
How long does it have to be open before it raises anything?
Whatever the plant sets, and it can differ per door and per time band. The switchroom door might be five minutes and the store room half an hour, because they are not the same risk and not the same traffic. If the alert fires every time somebody steps in to check a panel, the operator stops reading it within a week, and then it is no use on the night it really is left open.
Does IRIS know who left the door open?
No. IRIS does not identify anyone: it does not recognise faces, it does not read number plates, it does not compare them against any database and it does not store who anyone is. What it watches is the door, not people. The video of the moment is kept, and if it matters a person will interpret who is in it; the camera does not put names to anybody.
Demo · IRIS at work
Everything comes in. Only what matters gets through.
This sums up what IRIS does with one alert, from the moment it appears until it is closed. The real screen holds far more; this is the main thread.
- The rule gets built
- It goes to every camera
- Published, it watches alone
- And then it fires
Next step
The hospital
How long before somebody comes down that corridor at four in the morning?
13 cases: 12 raise an alert when something happens and 1 only measure. You see each image as it is, and then with what IRIS understands on top.
The school
Who sees the child who has fallen at the far end of the playground?
13 cases: 12 raise an alert when something happens and 1 only measure. You see each image as it is, and then with what IRIS understands on top.
And the best part
If the camera does not show it,IRIS does not see it. We say so up front, not afterwards.
No camera sees through a wall or in complete darkness. We would rather show you where the limit is, and place what you have well, than promise something that never appears on screen.
Tell us your problem and we will say whether IRIS understands it, or not yet.
We reply the same working day.