CAM-276
Smoke coming off a battery in the charging bay
Late afternoon in the warehouse. In the row of batteries in the charging bay, one of them has started to give off a column of white smoke that climbs to the roof. Two operators who were standing next to it walk away towards the aisle. Three more, further off, turn and leave. A few metres away there are stacked pallets of cardboard and a forklift parked beside the racking. The dock door on the left is open and there is a draught coming in. IRIS sees the smoke from the first second.
Turn on IRIS Vision
AI-generated image
What IRIS is
IRIS watches the plant for you.
IRIS looks at the cameras you already have on the plant floor and understands what it sees: a stopped line, someone inside a robotic cell, someone without their safety gear on, jammed parts. When something like that happens, it alerts right away; and whatever can be counted, it counts in numbers. All day long, with no one needing to watch the screen.
You tell it what you need to watch, and IRIS does it.
Here, for example, the moment a battery starts smoking, IRIS spots it instantly and alerts you with a photo of the exact spot and the video from the seconds before. That tells you which unit to isolate and what time the area was cleared. With that alert you decide whether to call emergency services right away, then check later if it happens again on that same row.
Works with the cameras you already have. Nothing to replace.
A person replies, not a form.
- Your footage never leaves your premises.
- It doesn't identify people.
- Certifications →
What IRIS understands
What it recognises in this scene
- column of smoke above the charging bay
- battery the smoke is coming from
- row of batteries on charge
- operators walking out of the bay
- stacked cardboard pallets right beside it
What this camera measures
An alert says something is happening. The reading says how much.
- 1 min 05 sTime with smoke
- 18:12Time of the first smoke
- 5People in shot
- 2People still in the bay
- 9Pallets stacked next to the bay
The figures on this screen are an example from the illustration, not any client's measurement.
The rule
You decide once. IRIS applies it always.
If
smoke appears in the battery charging bay
Then
- alert security and the warehouse manager with the camera and the time
- save the video from one minute before the first smoke
- count the people left in the bay until it is clear
The instruction that set it up«Alert me the moment you see smoke in the battery charging bay, even if no detector has gone off.»
What changes
What changes for whoever answers for the plant
A quarter to seven in the evening, the dock door open and pulling air, the roof ten metres up: smoke there is seen sooner by eyes than by a ceiling detector. With the camera, the warehouse manager gets the alert while the column is still rising, with the image of the exact spot and the video of what was there just before. That brings the phone call forward, points out which equipment to isolate and puts on record what time the area was cleared.
What people usually ask
Does IRIS know what is going on inside the battery?
No. The camera sees the smoke, the flames and the people leaving. With a thermal camera it also reads the heat on the outside surface. What is happening inside the cell is told by the battery’s own management system, and the cause by whoever opens it afterwards. IRIS contributes the picture and the minute it started.
Is this any use where there are already fire detectors?
Yes, and it works alongside them. A ceiling detector needs the smoke to rise and reach it; a tall building with open doors delays that. The camera sees the column right where it starts and adds what a detector cannot give: the picture of the spot and the video of what came before.
Can it mistake steam or dust for smoke?
It can, and that is why the site writes the rule. It is tuned to the charging bay, to the hours when there should be no vapour there, and to a minimum duration before it alerts. When an alert turns out to be nothing, it gets marked and the rule is tightened. No system is right every time and we are not going to claim otherwise.
Other cameras
- CAM-260 · A cage goes out through the wrong door
- CAM-261 · Two people, one turn of the gate
- CAM-262 · Hands on a trailer's rear lock
- CAM-263 · The trailer is at the wrong dock
- CAM-264 · The truck pulls away with a worker still inside
- CAM-265 · The pallet going into the truck is not the one for that route
See it for yourself
Everything comes in. Only what matters gets through.
This sums up what IRIS does with one alert, from the moment it appears until it is closed. The real screen holds far more; this is the main thread.
- Checks the whole system
- Flags what is failing
- Puts it on one screen
See it somewhere else
Who is watching a whole quay at three in the morning?
14 cases: 13 raise an alert when something happens and one only measures. You see each image as it is, and then with what IRIS understands on top.
Who is watching the cameras of a whole branch network?
13 cases: 12 raise an alert when something happens and one only measures. You see each image as it is, and then with what IRIS understands on top.
And the best part
The door was left open at two.Finding out at nine is no use to anyone.
The video tells you at nine. IRIS says it at two, with the camera, the time and the images from that moment. The difference between the two is whether someone can go.
Tell us your problem and we will say whether IRIS understands it, or not yet.
We reply the same working day.