CAM-378
The hood is raised and the fume circles it
Mid-afternoon in the casting bay. The extraction hood is up, hanging six feet above the hot line. Underneath, the glowing charge keeps moving along the trough and throws off a plume that never enters the hood: it rises straight up in front of it and drifts toward the roof. Three people are watching from the floor and one is pointing up. IRIS sees where the hood is and where the fume is going.
Turn on IRIS Vision
AI-generated image
What IRIS understands
What it recognizes in this scene
- plume rising outside the hood
- extraction hood raised
- glowing charge in the trough
- supervisor pointing at the hood
- two operators watching from the floor
What this camera measures
An alert says something’s happening. The reading says how much.
- 6 minTime with fume outside capture
- 9 minTime with the hood raised
- 4Times today
- 3People in frame
- 18:52Time
The figures on this screen are an example from the illustration, not any client’s measurement.
The rule
You decide once. IRIS applies it always.
If
there is a visible plume over the line and the hood is not lowered over the emission point
Then
- alert the maintenance manager with the camera and the time
- save the video from the hood going up until it returns to place
- add up the shift’s minutes of emission outside capture
The instruction that set it up«Tell me if fume comes off the line while the hood is raised, and tell me how many minutes it was like that.»
What changes
What changes for whoever answers for the plant
Whether the hood is where it should be is a perfect visual check for a camera: either you see it or you don’t, and you see it from a distance. And that’s exactly what separates a plant with an environmental case open against it from one without. The maintenance manager stops finding out through a neighbor’s complaint or an inspection: he finds out the same day, with the time, the video and the minutes the line spent emitting outside capture.
What people usually ask
Does IRIS measure what comes out of the stack?
No. A camera sees the plume and sees whether the hood is in place; it doesn’t analyze composition or concentration. That comes from the plant’s analyzers. What IRIS contributes is the exact minute of emission outside capture and the video that shows it.
Does it count as evidence in an inspection?
It counts as your own record, with time, image and duration, and that’s already far more than most plants have. IRIS is designed to help you comply; it doesn’t certify an environmental measurement. The official figure comes from equipment approved for it. The only thing in IRIS approved by the Centro Español de Metrología, Spain’s national metrology institute, is people counting. It’s a Spanish approval. What crosses over isn’t the seal, it’s the method: the same line, in the same place, every day.
What if the hood is raised for an operational reason?
Then it isn’t an alert, and the plant decides that. The rules are written by whoever runs the line: you can allow the hood up during charging and only raise an alert past the agreed number of minutes. IRIS applies the rule it is given; it doesn’t invent it or change it on its own.
Other cameras
- CAM-360 · The slab has stopped on the mill, with the beacons on red
- CAM-361 · The ladle stream has missed and molten metal is running across the floor
- CAM-362 · Snow and closed drums in the basket, still hanging over the furnace
- CAM-363 · The basket has been loaded from four different bays
- CAM-364 · Somebody is walking the aisle while the full ladle is moving
- CAM-365 · A coil is passing right over a worker
The real interface, step by step
We won’t just tell you. We’ll show you.
It’s a summary of the real screen: it plays by itself, step by step, and shows only the path of one case. The actual tool has far more than fits in here.
- Finds the plate
- Reads the characters
- Follows the same plate
Next step
Who is watching a site where there’s almost never anybody?
44 cases, and in every one of them IRIS raises an alert when something happens. You see each image as it is, and then with what it understands on top.
Why did the line stop?
237 cases, and in every one of them IRIS raises an alert when something happens. You see each image as it is, and then with what it understands on top.
And the best part
Stop scrubbing through six hours.Ask what happened and watch only that.
You type what you’re looking for in plain words — a white van, a door left open — and the moments it appears come back. What used to take an afternoon now takes minutes.
Tell us your problem and we’ll say whether IRIS understands it, or not yet.
A person answers, the same working day.